bay window generic repair
This building was a traditional two-storey mid-terrace domestic residence of Victorian vintage with a pitched tiled roof.

Problem
The front bay windows showed visible distortion and distress, accompanied by significant cracking to both main brickwork and brick entrance arches, which had also dropped.

Causation
It was clearly evident that the bay window had rotated away from the main building line, owing to subsidence. The bay window’s foundations were shallow compared with those of the main building. This situation had been exacerbated by the close proximity of a tall tree that was further desiccating the clay subsoil, though the subsidence was not deemed severe enough at the time to warrant underpinning.
Solution
The bay window was tied back to the main elevation using stainless steel bed joint reinforcement. This served also to beam up the brickwork and repair the cracking. In addition, the bay was tied back to the two floors behind to provide proper lateral restraint. The arch was pinned up, using stainless steel pins, and resined into the brickwork above. After installation, pointing was raked out, reinstated and tinted to match the existing (see coloured remedial works on our proposal picture).

Arboricultural works were undertaken on the tree (by others), to reduce the crown and accordingly lower its water demand from the underlying clay.


Action Wall Ties Generic Bay window repair techniques data sheets  

Action Wall Ties Generic Bay window repair techniques data sheets  



Action Wall Ties (AWT) are specialists in masonry reinforcement and repair, providing professional solutions to a wide variety of structural problems. Contact us on 01227 721 255, or email us.




back to
<< commercial clients